|AC32198||Glass bottle||10 g ||53.10|
|HS Code||2942 00 00|
|Molar mass||257.31 g/mol|
|Chemical and physical data|
|Melting point||124 - 129 °C|
|Molar mass||257.31 g/mol|
|Flash point||140 °C|
|Safety information according to GHS|
|Hazard Statement(s)||H261: In contact with water releases flammable gases. |
H314: Causes severe skin burns and eye damage.
|Precautionary Statement(s)||P280: Wear protective gloves/ protective clothing/ eye protection/ face protection. |
P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P402 + P404: Store in a dry place. Store in a closed container.
|Hazard Pictogram(s)|| |
|Storage class||4.3 Materials that form flammble gases in contact with water|
|WGK||WGK 3 highly water endangering|
Alkali and alkaline-earth metals should be taken up in an inert solvent and neutralized by adding 2-propanol (Cat. No. 100995) dropwise with stirring. Should the reaction be more violent than expected, conversion should be carried out with tert-butanol or octanol. Caution: This reaction produces hydrogen, which can form explosive mixtures; take necessary precautions. When the reaction has ceased, add water dropwise; neutralize; container D. In the case of alkali or alkaline-earth borohydrides, add methanol (Cat. No. 106008) with stirring; in the case of alkali or alkaline-earth amides and hydrides, organoaluminium and organotin hydrides, add 2-propanol (Cat. No. 100995) dropwise. The substances, which are usually in solid form, should be previously suspended in an ether! When the respective reaction has ceased, hydrolize with water; then neutralize. Container D or E. Lithium aluminium hydride must also be destroyed by slurrying in an ether. Under an inert gas and with thorough stirring, add dropwise a 1:4 mixture of ethyl acetate (Cat. No. 822277) and the ether used to prepare the slurry. Always ensure thorough mixing (stirring)! Container A.
|R Phrase||R 34 |
|S Phrase||S 6-26-36/37/39-45 |
Keep under protective gas.In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Wear suitable protective clothing, gloves and eye/face protection.In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
|Categories of danger||corrosive|
|Declaration (transport by sea) IMDG-Code||UN 3131 WATER-REACTIVE SOLID, CORROSIVE, N.O.S.(TETRA-N-BUTYLAMMONIUMBOROHYDRIDE), 4.3 (8), II, Segregation Group: 18 (Alkalis)|
|Declaration (transport by air) IATA-DGR||UN 3131 WATER-REACTIVE SOLID, CORROSIVE, N.O.S.(TETRA-N-BUTYLAMMONIUMBOROHYDRIDE), 4.3 (8), II|
|Assay (hypochlorite)||≥ 97 %|
|Melting range |
- lower value
|≥ 124 °C|
|- upper value||≤ 129 °C|
|Identity (IR)||passes test|